 |
|
Below are some of the machines from the Isle of Wight facility. Machinary from other sites will be added when it becomes available.
|
Manufacturer: |
Deckle Maho |
 |
|
Model: |
DMG125P |
|
X Axis: |
1245mm (49") |
|
Y Axis: |
880mm (34.64") |
|
Z Axis: |
800mm (31.49") |
|
Spindle Speed: |
20,000rpm |
|
Controller: |
Mills Plus |
|
Operator Programmable: |
Yes |
|
Through Spindle Coolant: |
Yes |
|
Additional Information: |
Tool Probes |
| Manufacturer: |
Deckle Maho |
|
| Model: |
DMG50 Evolution |
| X Axis: |
500mm (19.7") |
| Y Axis: |
520mm (20.47") |
| Z Axis: |
380mm (14.96") |
| Spindle Speed: |
20,000rpm |
| Controller: |
Mills Plus |
| Operator Programmable: |
Yes |
| Through Spindle Coolant: |
Yes |
| Additional Information: |
Vacuum Table |
| Manufacturer: |
Hitachi Seiki |
|
| Model: |
CA2311 |
| Bar Capacity |
60mm (2.1/2") |
| Y Axis: |
Full |
| Max Turn Diameter: |
450mm (17 3/4") |
| Spindle Speed: |
N/A |
| Controller: |
Secios Lambda |
| Operator Programmable: |
Yes |
| Chuck Diameter: |
200mm (8") |
| Manufacturer: |
Mazak |
|
| Model: |
Integrex 200Y |
| Bar Capacity |
51mm (2") |
| Y Axis: |
Full |
| Max Turn Diameter: |
355mm (14") |
| Spindle Speed: |
N/A |
| Controller: |
Mazatrol |
| Operator Programmable: |
Yes |
| Chuck Diameter: |
200mm (8") |
| Manufacturer: |
Mazak |
|
| Model: |
Integrex 200MY |
| Bar Capacity |
51mm (2") |
| Y Axis: |
Full |
| Max Turn Diameter: |
355mm (14") |
| Spindle Speed: |
N/A |
| Controller: |
Mazatrol |
| Operator Programmable: |
Yes |
| Chuck Diameter: |
200mm (8") |
| Manufacturer: |
Bridgeport |
 |
| Model: |
460 |
| X Axis: |
450mm (17.7") |
| Y Axis: |
310mm (12.2") |
| Z Axis: |
410mm (16.14") |
| Spindle Speed: |
6,000rpm |
| Controller: |
Heidenhain 2500 |
| Operator Programmable: |
Yes |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
Fourth Axis |
| Manufacturer: |
Bridgeport |
 |
| Model: |
412X |
| X Axis: |
450mm (17.7) |
| Y Axis: |
310mm (12.2") |
| Z Axis: |
410mm (16.14") |
| Spindle Speed: |
6,000rpm |
| Controller: |
Heidenhain 2500 |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
Cincinnati |
 |
| Model: |
Arrow1000 |
| X Axis: |
1020mm (40.1) |
| Y Axis: |
510mm (20") |
| Z Axis: |
560mm (22") |
| Spindle Speed: |
8,000rpm |
| Controller: |
Acramatic 2100 |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
Okuma |
|
| Model: |
MA-50HB |
| X Axis: |
700mm (27.56) |
| Y Axis: |
800mm (31.5") |
| Z Axis: |
700mm (27.56") |
| Spindle Speed: |
12,000rpm |
| Controller: |
OSP-U100M |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
B Axis 0.001'
Indexing Angle |
| Manufacturer: |
Doosan |
|
| Model: |
HM-45H |
| X Axis: |
600mm (23.62) |
| Y Axis: |
560mm (22.04") |
| Z Axis: |
560mm (22.04") |
| Spindle Speed: |
12,000rpm |
| Controller: |
FANUC 18M |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
B Axis 0.001'
Indexing Angle |
| Manufacturer: |
Mazak |
|
| Model: |
SQT10MS |
| Bar Capacity |
42mm (1 5/8") |
| Y Axis: |
N/A |
| Max Turn Diameter: |
250mm (14") |
| Spindle Speed: |
N/A |
| Controller: |
Mazatrol |
| Operator Programmable: |
N/A |
| Chuck Diameter: |
150mm (6") |
| Manufacturer: |
Yang |
|
| Model: |
CK3B |
| Bar Capacity |
90mm (3 1/2") |
| Y Axis: |
N/A |
| Max Turn Diameter: |
650mm (25 1/2") |
| Spindle Speed: |
N/A |
| Controller: |
Fanuc OT |
| Operator Programmable: |
N/A |
| Chuck Diameter: |
300mm (12") |
| Manufacturer: |
Harding |
|
| Model: |
Conquest 42 |
| Bar Capacity |
42mm (1 5/8") |
| Y Axis: |
N/A |
| Max Turn Diameter: |
360mm (14") |
| Spindle Speed: |
N/A |
| Controller: |
Fanuc OT |
| Operator Programmable: |
N/A |
| Chuck Diameter: |
150mm (6") |
| Manufacturer: |
Yang |
|
| Model: |
Eagle |
| X Axis: |
1020mm (40.15") |
| Y Axis: |
510mm (20.1") |
| Z Axis: |
510mm (20.1") |
| Spindle Speed: |
6,000rpm |
| Controller: |
FANUC OM |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
Bridgeport |
|
| Model: |
720x |
| X Axis: |
760mm (30") |
| Y Axis: |
410mm (16.14") |
| Z Axis: |
40mm (17.7") |
| Spindle Speed: |
6,000rpm |
| Controller: |
Heidenhain 2500 |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
Cincinnati |
|
| Model: |
Sabe 1250 |
| X Axis: |
1270mm (50") |
| Y Axis: |
660mm (26") |
| Z Axis: |
660mm (26") |
| Spindle Speed: |
8,000rpm |
| Controller: |
Heidenhain 415 |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
Cincinnati |
|
| Model: |
Lancer 1250 |
| X Axis: |
1270mm (50") |
| Y Axis: |
762mm (30") |
| Z Axis: |
770mm (30.31") |
| Spindle Speed: |
8,000rpm |
| Controller: |
Acramatic 2100 |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
Yes |
| Additional Information: |
|
| Manufacturer: |
Cincinnati |
|
| Model: |
Lancer 1500 |
| X Axis: |
1524mm (60") |
| Y Axis: |
762mm (30") |
| Z Axis: |
770mm (30.31") |
| Spindle Speed: |
8,000rpm |
| Controller: |
Acramatic 2100 |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
Yes |
| Additional Information: |
|
| Manufacturer: |
Dah Lih |
|
| Model: |
1020-BA |
| X Axis: |
1020mm (40.15") |
| Y Axis: |
550mm(21.65") |
| Z Axis: |
560mm(22.04") |
| Spindle Speed: |
6,000rpm |
| Controller: |
Fanuc IO-M |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
Yes |
| Additional Information: |
|
| Manufacturer: |
DEA |
|
| Model: |
CMM |
| X Axis: |
2500mm (98.43") |
| Y Axis: |
1000mm(39.37") |
| Z Axis: |
1000mm(39.37") |
| Spindle Speed: |
N/A |
| Controller: |
N/A |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
DIXI |
|
| Model: |
Jig Borer |
| X Axis: |
1000mm(39.37") |
| Y Axis: |
900mm(35.43") |
| Z Axis: |
800mm(31.5") |
| Spindle Speed: |
N/A |
| Controller: |
N/A |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
|
| Manufacturer: |
Okuma |
|
| Model: |
MA-500H |
| X Axis: |
700mm (27.56) |
| Y Axis: |
800mm (31.5") |
| Z Axis: |
700mm (27.56") |
| Spindle Speed: |
12,000rpm |
| Controller: |
OSP-U100M |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
B Axis 0.001'
Indexing Angle |
| Manufacturer: |
Swift |
|
| Model: |
Tutor |
| X Axis: |
710mm (27.95) |
| Y Axis: |
510mm (20.08") |
| Z Axis: |
330mm(12.99") |
| Spindle Speed: |
N/A |
| Controller: |
N/A |
| Operator Programmable: |
N/A |
| Through Spindle Coolant: |
N/A |
| Additional Information: |
N/A |
|
|
|
|
 |
